The advantages and disadvantages of honeycomb activated carbon depends on the adsorption capacity of activated carbon, so the quality of honeycomb activated carbon is equal to the adsorption capacity of honeycomb activated carbon. There are 3 methods to identify the level of honeycomb activated carbon adsorption value: The following is to introduce the specific implementation of these 3 methods:

One is to look at the volume of honeycomb activated carbon products, the weight of the same honeycomb activated carbon products, good quality honeycomb activated carbon volume is greater than the inferior honeycomb activated carbon products, this is because to improve the adsorption performance of honeycomb activated carbon, only in the activated carbon more manufacturing pore structure, activated carbon the looser, then its density will be lighter, So good honeycomb activated carbon feel will be relatively light, in the case of the same weight packaging, good performance honeycomb activated carbon than inferior activated carbon volume is much larger.

The second is to look at the bubbles produced by the honeycomb activated carbon product, if the more bubbles produced, the better the quality of the product. We can do a small experiment, will be a small honeycomb activated carbon products into the water, due to the effect of water infiltration, water will be immersed in the pores of activated carbon, in order to let the air in the pores out, resulting in a series of very small bubbles, in the water pulled out a small bubble line, and issued a Z z bubble sound, very interesting to look at. If this phenomenon is very intense, and the longer the duration, then it proves that the pore structure of honeycomb activated carbon products is very developed, is the better performance of honeycomb activated carbon adsorption.

Three is to look at the decolorization ability of honeycomb activated carbon products, another performance of honeycomb activated carbon adsorption capacity is to see its decolorization ability. This can also be done as a small experiment, first take two transparent cups, put pure water in one cup, then drop a drop of red ink, stir and pour half of the colored water into the other cup for comparison. Put two different kinds of honeycomb activated carbon into colored water, the amount needs to be half of the water or more, so it is more obvious, standing for 10 to 20 minutes after comparison with the water sample, it can be concluded that under the same conditions, the stronger the decolorization effect is that the better the adsorption of honeycomb activated carbon.